| Product Name | Specification | Descriptions | Applications | Technical Product Data Sheets | Material Safety Data Sheets | ||
|---|---|---|---|---|---|---|---|
| Pentocure – MBT 2-Mercaptobenzothiazole |
|
# Semi ultra fast accelerator in sulphur vulcanization system for diene rubbers . # Retarders for Chloroprene rubber. # Non-discoloring & nonstaining |
|
 |
|||
| Pentocure - MBTS 2-2'-Dithiobis(benzothiazole) |
|
# Semi-ultra fast accelerator in sulphur vulcanization system for diene rubbers. # Good retarder for Chloroprene rubber. # Non-discoloring & nonstaining. | Similar to Pentocure - MBT (Benefis of MBTS : Scorch safety is better than MBT) | |
|||
| Pentocure - ZMBT Zinc-2-mercaptobenzothiazole |
|
# Semi-ultra fast accelerator in sulphur vulcanization system for diene rubbbers. # Non-discoloring & nonstaining. # Scorch safety is much highed& hence can be used in place of MBT for scorch control. # It is mainly used in latex compounding along with Pentocure ZDEC/ZDBC to improve the state of cure. |
|
|
|||
| Pentocure – F Blend of MBTS & basic accelerators |
|
# Semi-ultra fast accelerator in sulphur vulcanization system for diene rubbbers. # Non-discoloring & nonstaining. # Scorch safety than MBT & slightly faster cure rate & higher state of cure as compared to MBT & MBTS # Recommended for white/colored products as compared to MBT, MBTS & ZMBT. |
|
|
|||
| Pentocure – CBS N-cyclohexyl-2-benzothiazolesulfenamide |
|
# Fast - delayed action accelerator in sulphur vulcanization system for diene rubber. # Non staining. At higher dosages, slight discoloration. # CBS shows faster cure rate, higher state of cure & moderate plateau effect as compared to Thiazole class. # Higher stress-strain properties along with better resilience and flex - fatigue resistance as compared to Thiazole class. |
|
|
|||
| Pentocure - NOBS/MOR 2-(4-Morpholinothio) benzothiazole |
|
# Fast - delayed action accelerator in sulphur vulcanization system for diene rubber. # Non staining. At higher dosages, slight discoloration. # MOR offers longer scorch safety as compared to CBS & TBBS. # MOR based compound shows excellent shelf life with retention of cure activity as compared to CBS & TBBS. |
|
|
|||
| Pentocure – TBBS N-Tertiarybutyl-2-benzothiazole sulfenamide |
|
# Fast - delayed action accelerator in sulphur vulcanization system for diene rubber. # TBBS based compound offers betterscorchsafety & higher state of cure as compared to CBS. # TBBS cured products shows higher modulus, tensile strength,resilience and elastic properties as compared to CBS & MOR. . |
|
|
|||
| Pukhocure – TMTM Tetramethyl thiuram monosulfide |
|
# Ultra fast accelerator in sulphur vulcanization system for diene rubber. # TMTM show better scorch safety than TMTD. # TMTMexhibitslowcrosslink density tham TMTD. # TMTM is a monosulfidic thiuram type. |
|
|
|||
| Pukhocure – TMTD Tetramethyl thiuram disulphide. |
|
# Ultra fast accelerator in sulphur vulcanization system for diene rubber. # TMTD used as a secondary accelerator with thiazole/ sulphenamide class accelerators. # TMTD shows faster scorch & cure characteristics with relatively broad curing range & flat plateau effect. # TMTD act as a retarder for CR & other halo-rubber |
|
|
|||
| Pentocure - ZBEC Zinc dibenzyl-dithiocarbamate. |
|
# Ultra fast accelerator. (Non-discoloring & nonstaining) # ZBEC used as primary as well as secondary accelerator in latex & dry rubber based compounds. # Required dosage of ZBEC is higher than ZDEC & ZDBC to achieve equivalent state of cure. |
|
|
|||
| Pentocure – ZDEC Zinc diethyl-dithiocarbamate. |
|
# Ultra fast accelerator for latex based compounds. # Secondary accelerators for dry rubber based sulphur cured compounds. # ZDEC shows scorching tendency, faster cure rate, higher cross link density but poor reversion resistance. # Very active booster accelerator even at very small dosages. # Non-staining & no-discoloring even on exposure to light. | 1) Latex Based Products: Latex foam. Coir foam, Latex Threads, Latex tubings, Surgical Gloves, Prophylactics, Carpet backings, Latex adhesives, etc. 2) Dry Rubber Based Products:White/Colored rubber products, Footwear, Seals, Hoses, Sponges, Rubber Sheeting | |
|||
| Pentocure – ZDBC Zinc dibutyl-dithiocarbamate. |
|
# Non-bloomimg, nonstaining ultra fast accelerator. # ZDBC is faster than ZDEC in latex compounding & vice-versa in dry rubber comounding. # ZDBC shows scorching tendency, faster cure rate, higher cross link density in combination with thiazoles. # Very good ageing resistance in presence of antioxidants. |
|
|
|||
| Pentocure – ETU Ethylene Thiourea |
|
# ETU imparts a high state of cure to neoprene compounds. # ETU with dosage 0.4 - 0.75 phr in Neoprene exhibits optimum heat/compression set resistance. # ETU works best for silica reinforced neoprene rubber. # It is an activator and secondary accelerator for lowsulfur vulcanization of other diene rubber. |
|
|
|||
| Pentocure – DPTU N,N-Diphenylthiourea |
|
#DPTU is a non-discoloring accelerator for CR. # It is used as secondary acclerator for CR, EPDM & other diene rubbers. # DPTU has faster cure times with better scorch resistance than ETU |
|
|
|||
| Pentocure – DPG N,N'-dipheny guanidine |
|
# DPG is a secondary vulcanization accelerator, frequently used as activator. # DPG is used in combination with sulfenamides for silica filled compounds. # Vulcaniate with gaunidines discolor on light exposure. # It provides a very long scorch time & slow full cure. |
|
|
|||
